Loading... Please wait...

30 ft. Control and Expansion Joint Filler Kit

Control and Expansion Joint Filler Kit

Pricing & Online Purchasing

Contractor Pricing

EmecoleShop.com is our new product website exclusively for contractors. Learn more and request a login.

D-I-Y Homeowner Pricing

D-I-Y Products available to the General Public
- or find a contractor in your area.

Fast and Reliable Shipping - See Maps.
Express shipping available for an additional charge.

 

The Emecole control and expansion joint filler can be used to fill expansion joints and control joints. It forms a water and air tight seal.

This kit includes Emecole 85-90.  It's a two part, gray polyurea that tenaciouly bonds to concrete surfaces.  85-90 is a self leveling, hard rubber like material that can be shaved with a razor after installation for a smooth finished surface.

Expansion and control joints need to allow concrete slabs to move and shift.  The properties of 85-90 allow that movement while creating a tight seal.

This kit comes with enough material and accessories to fill approximately 30ft of control or expansion joints (coverage may vary)

Common Applications:

  • Basements: Use this kit to fill expansion joints in basement floors.  An expansion joint is a common source of moisture and dangerous soil gases like radon, 85-90 seals the joint while still allowing slab movement.
  • Warehouse floors: Expansion and control joints in warehouse floors often catch the small wheels of carts.  Emecole 85-90 self levels in the joint and it can be shaved smooth for a seemless transition from one slab to the next.
  • The Joint Between a Patio and a Foundation:  There are typically gaps between a patio and the foundation of a home.  Rain water collects on the patio and it can run down into that gap.  That water then runs down the depth of the foundation and increases the liklihood of water in a basement.  85-90 can waterproof that gap so the water does not run down the foundation wall.

85-90 in this kit is packaged in a special two part universal tubeset.  Both part A and part B of 85-90 are inside a specially designed tubeset that fits a standard caulk gun (available at any hardware store).  Emecole 85-90 is also available in full case quantities of dual tubesets.  (Dual tubesets are packaged in 300cc tubes and require a 300cc dual dispensing gun)

*To ensure optimum chemical performance, each Emecole 85-90 cartridge should be shaken approximately 10 to 12 minutes just before use.


Included Components with Kit:

  • Three universal tubes of Emecole 85-90 Gray - fits a standard caulk gun
  • Three 3/8x30 mixers
  • Three cartridge nuts
  • Three cartridge restrictors

Also included are rubber gloves, safety glasses, step-by-step written instructions with complete product data and SDS information.

Standard caulk gun (not included with kit) required for dispensing of Emecole 85-90 Gray single tubes.


Product Data Sheet: