Loading... Please wait...

Emecole "Jake" 600 Dispensing Gun

Jake 600 Dispensing Gun

Pricing & Online Purchasing

Contractor Purchasing

EmecoleShop.com is our new product website exclusively for contractors. Learn more and request a login.

This product is exclusive to contractors.

Fast and Reliable Shipping - See  Maps.
Express shipping available for an additional charge.

 

The Emecole "Jake" Gun is used by contractors for the installation of Fortress Carbon Fiber/Kevlar Grid Straps. Grid Straps adhere to the foundation wall via Fortress 4020 Epoxy Gel, a 600/300 (2:1) dual cartridge sized combination. The Emecole "Jake" Gun accommodates cartridge combinations of both 600/300 and 600/600.

The Emecole "Jake" Gun introduces maximum manual power coupled with continuous flow for the dispensing of single and dual cartridge systems. The Emecole "Jake" compares favorably with air-powered counterparts in performance (plus being lighter, easier to handle, and less costly). 

The Emecole "Jake" 600 utilizes a high performance trigger mechanism which actuates a compression spring. Together, they extend the force which results in the continuous flow of material from the cartridges(s) through the static mixer. This continuous flow overcomes mixing problems which may otherwise occur in systems using static mixers. These problems typically arise from the pulsating flow resulting from the use of conventional trigger mechanisms as the sole source of power. The force generated by the spring mechanism can also be adjusted to best shift the flow and power requirements of specific application simply by changing spring tensions.

The drive rod and push rods in the Emecole "Jake" 600 are in-line. This optimizes the power generated by the trigger mechanism and eliminates twisting of the system, associated with push rods being not in-line with the drive rod. The Emecole "Jake" 600 can be adapted to any ratio and cartridge size associated with dual cartridges.

The Emecole "Jake" Gun is dependable and economically efficient for contractors specializing in the installation of Carbon Fiber/Kevlar Grid Straps.

  • Patented spring loading technology provides a constant flow of material at 20-40psi and reduces the installer's fatigue.
  • For use with our Carbon Fiber Reinforcement systems.
  • Interchangeable plungers allow the Emecole Jake 600 to be used with any combination of 600cc and 300cc tube sets.
  • Heavy duty design and materials provide years of use.


Supplemental Information: