Loading... Please wait...

30 ft. Foundation Crack Repair Kit - Epoxy

Repair Structural Foundation Cracks

Pricing & Online Purchasing

Contractor Pricing

EmecoleShop.com is our new product website exclusively for contractors. Learn more and request a login.

D-I-Y Homeowner Pricing

D-I-Y Products available to the General Public
- or find a contractor in your area.

Fast and Reliable Shipping - See Maps.
Express shipping available for an additional charge.


Emecole recommends the use of epoxy injection for the repair of structural cracks which have the potential to compromise the foundation's structural integrity. This kit includes all the components, including our advanced Emecole 121 Premium - Fast Curing Epoxy (Low Viscosity), to repair up to 30 feet of cracks. Emecole 121 Premium - Fast Curing Epoxy rapidly thickens inside the crack within 15 to 20 minutes, minimizing loss of material leaking into the soil. This also will stop water from entering the crack. The added strength of Emecole 121 Premium - Fast Curing Epoxy ensures for a very strong bonding of the concrete after it has fully cured. For wet and leaking cracks not posing a structural problem to the foundation, we recommend our 30 ft. Foundation Crack Repair Kit - Polyurethane Foam. For more information about diagnosing your foundation crack, visit our Deciding Between Epoxy or Polyurethane Foam page (also includes a brief video).

Structural cracks are often caused by movement in the foundation, thus resulting in long-term creeping and fatiguing of concrete. Seasonal freezing/thawing of the ground is one example of added stress that the foundation endures. After a structural crack in the foundation has been repaired, the existing problem of foundation movement still exists, which may result in new cracks. Emecole's Carbon Fiber Staples provide the necessary reinforcement for structural cracks in the foundation. The installation of Carbon Fiber Staples will ensure that the repaired crack and the surrounding concrete remains strong and structurally safe.

We also recommend viewing our "Deciding Between Epoxy or Polyurethane" video.

Includes the necessary materials to repair up to 30 feet of cracks.

Click to View Kit Components >>

  • Six tube sets of Emecole 121 Premium Epoxy injection material
  • Choice of Surface Seal:
    • Three tube sets of Emecole 901 Surface Seal -- cures in two to four hours
    • Three tube sets of Emecole 302 Surface Seal -- cures in approximately 20 minutes (available only to contractors)
    • Three tube sets of Emecole 322 Seal-n-Peel Surface Seal -- cures in approximately 15 to 30 minutes, Seal-n-Peel easily peels off the foundation leaving a clean finished look
  • One syringe of Emecole 455 Blow Hole Repair Material
  • Six 1/4" x 32 mixers and six nuts
  • Six cross-over restrictors
  • 50 surface ports and caps
  • 10 corner ports
  • Four hose assemblies
  • Choice of Dispensing Gun:
    • Emecole Manual Dispensing Gun (standard gun)
    • Emecole "Jake" 300 Dispensing Gun (optional upgrade)
  • One trowel & wire brush

Also included are rubber gloves, safety glasses and written instructions with complete product data and SDS information. Kit components are conveniently packaged in a reusable tool box.

Hide >>

Supplemental Information:

Product Data Sheets: