Loading... Please wait...

10 ft. D-I-Y Foundation Crack Repair Kit - Epoxy

Free Shipping

Fast & Reliable Shipping - See Shipping Maps.
Same day shipping on all in-stock orders placed by 2pm CST. Orders requiring expedited shipping must be completed by phone.

Emecole recommends the use of epoxy injection for the repair of structural cracks which have the potential to compromise the foundation's structural integrity. This kit includes our advanced Emecole 121 Premium - Fast Curing Epoxy (Low Viscosity) and all the components necessary to complete the task. Emecole 121 Premium - Fast Curing Epoxy rapidly thickens inside the crack within 15 to 20 minutes, minimizing loss of material leaking into the soil. This also will stop water from entering the crack. The added strength of Emecole 121 Premium - Fast Curing Epoxy ensures for a very strong bonding of the concrete after it has fully cured. For wet and leaking cracks not posing a structural problem to the foundation, we recommend our 10 ft. Foundation Crack Repair Kit - Polyurethane Foam. For more information about diagnosing your foundation crack, visit our Deciding Between Epoxy or Polyurethane Foam page (also includes a brief video).

View Diagram: Universal Cartridge Assembly

You may also be interested in viewing our 10' Kit with Surface Seal-n-Peel video. Surface Seal-n-Peel easily peels off the wall, leaving a cleaner looking finish. We also recommend viewing our "Deciding Between Epoxy or Polyurethane" video.

Includes the necessary materials to repair up to 10 feet of cracks.

Click to View Kit Components >>

  • Choice of Epoxy Amount:
    • Four single tubes of Emecole 121 Premium Epoxy injection material for hairline cracks (for crack widths less than 1/16") - use with a standard caulk gun
    • Eight single tubes of Emecole 121 Premium Epoxy injection material for wide cracks (for crack widths between 1/16" and 1/8") - use with a standard caulk gun
  • Choice of Surface Seal:
    • Two jars of Emecole 901 Surface Seal and Port Adhesive -- cures in approximately 2 to 4 hours and stays on the wall after injection
    • Two single tubes of Emecole 322 Surface Seal-n-Peel -- cures in approximately 15 to 30 minutes, Seal-n-Peel easily peels off the foundation leaving a clean finished look
  • 15 surface ports and caps - see how to apply ports to a cracked foundation corner
  • Four 1/4" x 32 mixers
  • One injection hose assembly
  • One wire brush
  • Two mixing sticks
  • One drop cloth
  • One plastic trowel/Putty knife

Also included are rubber gloves, safety glasses and written instructions with complete product data and SDS information.

Required Tools (not included): A standard caulk gun and a paper plate or scrap cardboard for mixing Emecole Surface Seal.

Hide >>

Product Data Sheets: