|
 |
Products for Concrete Sealing and Port Adhesives
The Emecole line of concrete sealing products is specifically designed for attaching surface ports and sealing concrete cracks prior to injecting. They exhibit optimal working and curing times for a given residential, commercial and industrial concrete repair application.
Each of the formulations easily and smoothly trowel on both vertical and horizontal surfaces. They effectively bond surface injection ports on to dry and/or lightly moist surfaces (not recommended for actively wet foundation cracks). They do not exude odorous or toxic vapors during cure.
| Concrete Surface Seal and Port Adhesives Selector Guide
Fast Setting, Low Odor, Paste Systems
for Concrete Repair
| |
Working Time
(Minutes) |
Time to Injection
(Minutes) |
|
|
|
|
|
|
|
|
|
|
| For sealing cracks and securing
injection ports prior to injection with either
epoxy resin or urethane foam. Low odor, rapid
curing, non-sag, economical epoxy formulated to
facilitate removal for appearance if required.
Not recommended for applications other
than as a surface seal . Available in
grey and white colors.
|
|
|
|
|
|
|
|
| Product of choice for sealing
cracks and securing injection ports prior to pressure
injection with either epoxy resin or urethane
foam. A high strength and more rapid version of
Emecole 301 that meets the requirements of ASTM
C-881 finished product specifications. It can
also be used for structural applications.
|
|
|
|
|
|
|
|
|
Easy to remove temporary surface seal that can
be ‘peeled' from concrete surfaces following initial
cure of the injection epoxy or foam. Eliminates
time-consuming grinding, burning, and chipping
of surface seal for removal when appearance is
important in repairing a swimming pool or basement.
more >>>
|
| |
|
|
|
|
|
| Fastest curing surface seal. Ideal
for shorter cracks. The speed of cure minimizes
application down time prior to injection.
|
| |
|
|
|
|
|
| Similar to 455 Fast with outstanding
adhesion to most plastic pipes, with longer working
and cure times.
|
| |
|
|
|
|
|
| A very high strength two-component
epoxy paste for surface sealing, anchoring, and
other structural applications. Meets ASTM C-881
finished product specifications. |
|
|
|
|
