Foundation Crack Repair Kits

The stopping of water seepage in basements is possible by the repair of poured foundation cracks with low-pressure crack injection. Emecole's foundation crack repair kits are equipped with the necessary components, conveniently packaged for the proper repair of foundation cracks using low-pressure crack injection.

For each foundation crack repair kit, customers have a choice of a liquid polymer for injection: either a polyurethane foam, for wet and leaking wall cracks, or an epoxy resin, for structural cracks. Customers can also choose between our 30 foot kit, for the repair of up to 30 feet of cracks, or our 60 foot kit, for the repair of up to 60 feet of cracks.

With all the needed components included, Emecole's repair starter kits for foundation wall cracks are ideal for new waterproofing contractors or for general contractors with the occasional call for basement seepage, leaks and water problems. Kit components are also available individually for quick and convenient re-supply of consumable materials.

Foundation Crack Repair 30' Urethane Foam Kit Components

  • 30 ft. Foundation Wall Crack Repair Kit

    Three dual cartridges Emecole 302 Surface seal

  • Three dual cartridges Emecole 102 Urethane Foam injection material

  • Syringe 455-0.5 Fast Blow Hole Repair/Port Adhesive

  • Four 1/4 x 24 element mixers & 4 retaining nuts

  • Six cross-over restrictors

  • Fifty surface ports and caps

  • Ten corner ports

  • Four hose assemblies

  • "Jake" 300/300/150 manual dispensing tool

  • Safety glasses

  • Five pair rubber gloves

  • Trowel & wire brush

  • Step-by-step instructional CD-ROM

  • MSDSs/PDs/How to Use Jake Tool

  • Tool box

Foundation Crack Repair 30' Epoxy Kit Components

  • Three dual cartridges Emecole 302 Surface Seal

  • Six dual cartridges Emecole 121 LV Epoxy injection material

  • Syringe 455-0.5 Fast Blow Hole Repair/Port Adhesive

  • Six 1/4 x 32 element mixers & 6 retaining nuts

  • Six cross-over restrictors

  • Fifty surface ports and caps

  • Ten corner ports

  • Four hose assemblies

  • "Jake" 300/300/150 manual dispensing tool

  • Safety glasses

  • Five pair rubber gloves

  • Trowel & wire brush

  • Step-by-step instructional CD-ROM

  • MSDSs/PDs/How to Use Jake Tool

  • Tool box

Foundation Crack Repair 60' Urethane Foam Kit Components

  • 60 ft. Foundation Wall Crack Repair Kit

    Six dual cartridges Emecole 302 Surface seal

  • Six dual cartridges Emecole 102 Urethane

  • Foam injection material

  • Syringe 455-0.5 Fast Blow Hole Repair/Port Adhesive

  • Eight 1/4 x 24 element mixers & 4 retaining nuts

  • Six cross-over restrictors

  • One-hundred surface ports and caps

  • Ten corner ports

  • Eight hose assemblies

  • "Jake" 300/300/150 manual dispensing tool

  • Safety glasses

  • Ten pair rubber gloves

  • Three surface seal brushes

  • Trowel & wire brush

  • Step-by-step instructional CD-ROM

  • MSDSs/PDs/How to Use Jake Tool

  • Tool box

Foundation Crack Repair 60' Epoxy Kit Components

  • Six dual cartridges Emecole 302 Surface Seal

  • Twelve dual cartridges Emecole 121 LV Fast Epoxy injection material

  • Syringe 455-0.5 Fast Blow Hole Repair/Port Adhesive

  • Twelve 1/4 x 32 element mixers & 12 retaining nuts

  • Six cross-over restrictors w/Instructions

  • One-hundred surface ports and caps

  • Ten corner ports

  • Eight hose assemblies

  • "Jake" 300/300/150 manual dispensing tool

  • Safety glasses

  • Ten pair rubber gloves

  • Trowel & wire brush

  • Step-by-step instructional CD-ROM

  • MSDSs w/Instructions

  • Tool box

Foundation Crack Repair Seal-n-Peel Kits - 30 and 60 foot

Seal-n-Peel Surface Seal, Concrete Crack RepairEmecole Foundation Crack Repair Kits come equipped with port adhesive and surface seal. After the crack(s) has been injected, the surface seal and ports may be removed by chipping or grinding.

An easier solution is Emecole's Seal-n-Peel Surface Seal, which may replace the standard surface seal in either our 30 foot or 60 foot kit.

With the use of Emecole's Seal-n-Peel, the surface seal and ports can easily be removed once the injection material has completely cured inside the crack(s). The surface seal and ports are stripped starting from the top and peeled off the wall in one easy step.

All repairs become almost invisible with the removal of the Seal-n-Peel, which is helpful, especially if the home is going on the market in the near future.


Foundation Crack Repair 30' Urethane Foam Seal-n-Peel Kit Components

  • Three dual cartridges Emecole 322 Seal-n-Peel Surface Seal

  • Three dual cartridges Emecole 102 Urethane Foam injection material

  • Syringe 455-0.5 Fast Blow Hole Repair/Port Adhesive

  • Four 1/4 x 24 element mixers & four retaining nuts

  • Six cross-over restrictors w/Instructions

  • Fifty surface ports and caps

  • Ten corner ports

  • Four hose assemblies

  • "Jake" 300/300/150 manual dispensing tool

  • Safety glasses

  • Five pair rubber gloves

  • Trowel & wire brush

  • Step-by-step instructional CD-ROM

  • MSDSs w/Instructions

  • Tool box

Foundation Crack Repair 30' Epoxy Seal-n-Peel Kit Components

  • Three dual cartridges Emecole 322 Seal-n-Peel Surface Seal

  • Six dual cartridges Emecole 121 LV Epoxy injection material

  • Syringe 455-0.5 Fast Blow Hole Repair/Port Adhesive

  • Six 1/4 x 32 element mixers & 6 retaining nuts

  • Six cross-over restrictors w/Instructions

  • Fifty surface ports and caps

  • Ten corner ports

  • Four hose assemblies

  • "Jake" 300/300/150 manual dispensing tool

  • Safety glasses

  • Five pair rubber gloves

  • Trowel & wire brush

  • Step-by-step instructional CD-ROM

  • MSDSs w/Instructions

  • Tool box

Foundation Crack Repair 60' Urethane Foam Seal-n-Peel Kit Components

  • Six dual cartridges Emecole 322 Seal-n-Peel

  • Six dual cartridges Emecole 102 Urethane Foam injection material

  • Syringe 455-0.5 Fast Blow Hole Repair/Port Adhesive

  • Eight 1/4 x 24 element mixers & 8 retaining nuts

  • Six cross-over restrictors w/Instructions

  • One-hundred surface ports and caps

  • Ten corner ports

  • Eight hose assemblies

  • "Jake" 300/300/150 manual dispensing tool

  • Safety glasses

  • Ten pair rubber gloves

  • Trowel & wire brush

  • Step-by-step instructional CD-ROM

  • MSDSs w/Instructions

  • Tool box

Foundation Crack Repair 60' Epoxy Seal-n-Peel Kit Components

  • Six dual cartridges Emecole 322 Seal-n-Peel

  • Twelve dual cartridges Emecole 121 Epoxy injection material

  • Syringe 455-0.5 Fast Blow Hole Repair/Port Adhesive

  • Twelve 1/4 x 24 element mixers & 8 retaining nuts

  • Six cross-over restrictors w/Instructions

  • One-hundred surface ports and caps

  • Ten corner ports

  • Eight hose assemblies

  • "Jake" 300/300/150 manual dispensing tool

  • Safety glasses

  • Ten pair rubber gloves

  • Trowel & wire brush

  • Step-by-step instructional CD-ROM

  • MSDSs w/Instructions

  • Tool box

Emecole 322 Seal-n-Peel Surface Seal also available in individual tube sets sold separately.

Foundation Crack Structural Repair

Concrete Foundation Reinforcement StaplesReinforce foundation crack repairs using Carbon Fiber Countersunk Staples - available in select kits.

Carbon Fiber Staples Information


Top of Page | Previous Page | Home Page

Line Break


Questions & pricing? Contact us for further assistance. Product literature and select samples available upon request. To place an order, please call during our normal business hours, Monday - Friday between 6:30 a.m. - 5 p.m. CT.